...
And finally, when all else fails, it may be necessary to contact Handpoint Support. Some issues can only be resolved from our end, and in those cases, we are happy to assist.
So, let's get started.
Getting Started
Setup and basic knowledge. This is the basic training section, knowledge that merchants can learn themselves. Handpoint provides card reader user guides and guide for our Handpoint mobile payment apps right here, as well as warranty information.
...
If using an iPhone, it may be necessary to first un-pair the card reader with the phone before attempting to pair with another. This is a common issue that iPhone users run into, and it's not exclusive to our card readers.
2. Quick Fixes
“Have you tried turning it off and on again?”
...
Remember: always check for software updates after a flash reset
An update is necessary whenever you perform a flash reset or periodically with regular use. The card reader might need to fetch and apply a software update, a config update, or both.The update process depends on the POS software being used. For specific instructions, contact your provider. When an update has started, the card reader will show the status on its screen and restart in some cases. In the case of an error, check internet connectivity and Bluetooth connectivity and try again!
If all else fails contact Handpoint
3. Context-Based
It’s important to know:
Common Error Messages
Invalid BPK Critical error The card reader is in tamper mode. It's a security feature meant to protect the cardholder's sensitive data. It can happen if someone tries to open the case, but also if: ◦ it’s dropped ◦or the battery becomes depleted Unfortunately, the only way to resolve the Invalikd BPK error message is to return it to a secure facility and replace it. Refer to the card reader storage pamphlet for info on how to prevent this |
Comm. ErrorThis error means that there was an error in communication between the card reader and the mPOS app. The cause can be simple. •Ensure that you are within bluetooth range •Frequently, trying to perform the operation that was being performed when the error message came up can work •Restarting the card reader sometimes solves the issue. If the error continues to be displayed after repeated tries, contact Handpoint |
Network Error/Send ErrorFrequently this error message means that the internet connection is inadequate or in some cases, Handpoint's Back end system or the systems it connects to is temporarily out of service. Most most likely, either the 3G connection is too weak or the merchant’s Wifi is not working properly. •Check internet settings •Otherwise, Contact Handpoint |
Processing ErrorAn unexpected error was encountered during transaction processing. •Please retry the operation •If the issue persists please contact support |
Device Not InitializedThe card reader didn't fetch its configuration settings during the initial setup, or there was an error registering the device in the Handpoint system. •Try updating the card reader •If the problem persists, contact Handpoint immediately to resolve this. |
Bad RequestThis is a response message from the processor/acquirer, and could have multiple causes. Your support resource will need to see the message log to determine the reason and best course of action. •Contact Handpoint and/or your processor |
4. In-Depth
Support Mode/Debug Mode
On Android:1.After entering your pass code and logging into the app, swipe to the left to reach the menu. 2.Scroll down to the Support Mode option and uncheck the box if it’s enabled. |
On iOS:1.After entering your pass code and logging into the app, swipe to the left to reach the menu. 2.Scroll down until you see the Support Mode option and disable it if it’s enabled. |
5. Contacting Handpoint
If all else fails, get in touch with us. In order to assist you, we will need to see the following information sent with the support request.
- Serial number of device
- Company/merchant name
- Time and date of error
- Error/Issue description
- Type of operating system
- Error/issue logs
- Type of internet connection, if applicable
- Handpoint SDK version
- Type of Handpoint device
- What was happening when the error occurred?